Beschrijving
Arctic Freezer i13 X Compact Heatsink & Fan Intel Sockets 92mm PWM Fan Fluid Dynamic Bearing 150W TDP 6 Year Warranty Compact Intel CPU Cooler Small Footprint For Optimal Compatibillity Pre-Applied MX-2 Thermal Paste Longer Lifespan Thanks to its Low Motor Temperature Offset Heat Pipes Enable Optimal Heat Dissipation P-Fan For Increased Performance Fluid Dynamic Bearing Direct Touch Heat Pipes More Cooling Capacity With Freezer I13 More Efficient And Whisper Quiet Multilingual Manuals Small Footprint For Optimal Compatibility The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility. Pre-Applied MX-2 Thermal Paste Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly. Longer Lifespan Thanks to its Low Motor Temperature The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X. Offset Heat Pipes Enable Optimal Heat Dissipation The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air. P-Fan For Increased Performance Inspired by the P-series, the Freezer i13 X’s fan benefits from all of the advantages of P-fans: – High static pressure for increased cooling performance – Broad RPM range – Lower power consumption – Less vibration – PWM for synchronous fan control Fluid Dynamic Bearing Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended. Direct Touch Heat Pipes The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes. More Cooling Capacity With Freezer I13 X The ARCTIC Freezer i13 X sets new standards in cooling. Proven to outperform its predecessor in cooling capacity. More Efficient And Whisper Quiet In addition to operating more quietly, even at maximum speed, the Freezer i13 X’s built-in fan motor is also much more efficient. The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 %25 in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %25, allowing the Freezer i13 X to run at a whisper-quiet 0.3 sone when at maximum speed. Multilingual Manuals ARCTIC installation manuals come in a variety of languages. They are regularly updated and easy to access from anywhere in the world. Specification Type: Heatsink and Fan AMD/Intel: Intel Compatibility: “Intel 1200, 1151, 1150, 1155, 1156” TDP: 150W Fan Connector(s): 4-pin LED Lightin No Colour: Black & White LED Lightin – Material: Aluminium Fins Copper Heatpipes Weight: 443 g Fan Dimensions: 1 x 92mm Dimensions: (LxWxH) 86 x 109 x 137 mm Fan Controller: PWM Rotation Speed: 2000 RPM Fan Bearin Fluid Dynamic Bearing Noise level: 22.5 dBA Power: 0.07 A Package Type: Retail Package Weight: 0.6200 kg Warranty: 6 Years
